LIMINAL LOUD

HELLAFLO Free: four Ableton settings recipes

Choose the factory shape first, then enter these values. These are starting settings for the free edition. Recovery finish and Depth should fit your kick tail and musical part.

Manual-entry settings for HELLAFLO Free 0.1.0
RecipeModeDurationShapeDepth %Recovery finish %Smoothing msKick gain dBThreshold dB
Steady pad pumpTempo Loop1/4Smooth Gate755530-20
Light synth duckTempo Loop1/4Round Gate354830-20
Long pad swellTempo Loop1/2Late Gate858550-20
Broken-beat duckFollow Kick1/4Fast Gate754830-20

Set up the route

  1. Put Hellaflo Free after the instrument on the track to duck.
  2. Choose the factory shape first, then set Mode, Duration, Depth and Recovery finish.
  3. Leave other curve points and Bend at that factory shape until you adjust by ear.
  4. Set Output smoothing in Settings. Kick input Gain and Threshold matter only in Follow Kick.
  5. For Follow Kick, enable Live device Sidechain, choose the kick in Audio From, and adjust Threshold around the measured input peaks.
  6. Save your finished setting in a Live Rack. Reconnect the kick source when moving the Rack to another Set.

CSV and JSON files are settings references. Enter the values manually; they are not plugin preset files or an Ableton Set. Threshold −20 dB is a starting point; adjust it to the incoming kick. These files contain no audio or synth presets.

Read the time scale

A 1/4 cycle is one quarter-note beat. At 128 BPM it lasts 468.75 ms. Recovery finish 55% places the recovery peak about 258 ms into that cycle. Changing the song tempo changes the cycle time.

With a curve point at zero, 75% Depth targets 25% gain (about −12 dB). Smoothing and the moving envelope affect the live gain-reduction meter.